Monaco 2009 Knight, Owner'S Manual

Page: 101 / 260

9
2009
K
night
Appliances - 4
FIREpLAcE ELEcTRIc (OpTIONAL)
The
fireplace
operates
on 120
Volt AC
supplied
by shore
power or
generator
and
produces heat using interior lamps. At start up
the fireplace may emit a slight, harmless odor
caused by the initial heating of internal parts.
Follow the recommendations listed below
to reduce the risk of fire, electrical shock or
injury.
Read all instructions prior to using the
fireplace.
The remote control supplied with the
fireplace will turn the unit on and off.
The main ON/OFF switch must be
turned ON before remote control will
operate.
The fireplace is hot while in use.
To avoid burns, DO NOT let skin
touch hot surfaces. Keep combustible
materials, such as furniture, pillows,
bedding, paper, cloth and curtains at
least 3’ from the front of the unit.
Extreme caution is necessary when
the fireplace is operated by or near
children and/or handicap persons and
whenever the fireplace is left operating
unattended.
Foreign objects in any ventilation or
exhaust opening can cause electric
shock, fire or damage the heater.





To prevent a possible fire,
DO NOT
block air intake or exhaust in any
manner.
The fireplace contains hot and arcing
interior parts.
DO NOT store gasoline,
paint, or flammable liquids where the
unit will be exposed to flammable
vapors.
DO NOT
modify the fireplace. Use it
only as described in this manual. Any
other use not recommended by the
manufacturer may cause fire, electric
shock or injury.
DO NOT burn wood or other materials
in the fireplace.
DO NOT
strike fireplace glass.
Always disconnect power before
performing fireplace cleaning or
maintenance.
INFORMATION
Consult fireplace OEM manual for
detailed maintenance and operating
instructions.
Operation






The following will explain the function of
each control. To access the controls, open
the upper grill by pulling the top forward
and down. To conceal the controls during
operation, return the grill to the original
upright position.
Main ON/OFF Switch:
The ON/OFF
switch supplies power to all fireplace functions
(Heater/Flame). The fireplace can also be
turned on and off using the remote control
supplied with the unit. The main ON/OFF
switch must be turned ON before remote
control will operate.
Flame Action Control:
Turn the flame
action control knob to adjust flame speed to
the desired level.
Flame Brightness Control: Turn the knob
to increase or decrease brightness of the flame
and embers.
Heater ON/OFF Switch:
Supplies power to
heating unit when main ON/OFF switch is ON.
Heater Thermostat Control: Turn the
thermostat control clockwise to increase
temperature setting or counterclockwise to
decrease temperature setting.
030997
031312b