5 Commissioning and operation
5.2 Connecting peripheral devices
34
XP-503 01/2017 MN048014 EN www.eaton.com
5.2
Connecting peripheral devices
5.2.1
Interfaces
Connection locations
The ports used to connect peripherals are located on the back of the housing.
These connections are accessible at the bottom of the housing (the housing does not need to be
opened in order to access these ports).
Example: XP-503-15, The following also applies to other device versions as applicable.
Interfaces:
2 x Ethernet, 2 x USB 3.0, DVI-I, RS 485, RS 232
Abb. 9
Connection locations
Do not plug in or disconnect any plugs during operation!
Before connecting peripherals, make sure they are designed for use in industrial
environments!
For the ports' layout, see the nameplate on the back of the housing.
The connections are standard contacts with the corresponding standard pinouts.
