Moeller XP-503 Manual Download

Page: 38 / 74

5 Commissioning and operation

5.2 Connecting peripheral devices

XP-503 01/2017 MN048014 EN www.eaton.com

5.2.2

Periphery



Connected devices must have the CE mark

(for industrial environments!).
An external keypad can be used simultaneously with the touch panel.

Keypad

The XP-503 has been designed to work with the following keypads:



USB keypad

A USB keypad can be connected to one of the USB interfaces.

It may be necessary to install a USB keypad driver the first time you use the keyboard.

Mouse

The XP-503 has been designed to work with a variety of mouse types:



Serial mouse

A serial mouse can be connected to the serial ports (RS 232). The matching mouse driver must be

installed and configured before being able to use the mouse.



USB mouse

A USB mouse can be connected to one of the USB ports.

It may be necessary to install a USB mouse driver the first time you use the mouse.

Printer

A printer can be connected to one of the USB ports and used once the corresponding printer driver

has been installed.

USB flash drive

A USB stick can be plugged into one of the USB interfaces.

Display

An external display unit can be connected to the DVI-I interface.

Ethernet network

The XP-503 can be connected to various computer networks using the two RJ45 ports that serve as

Ethernet ports.
Ethernet is a standard used for local networks, and requires twisted-pair cables in order to connect

the computers.

Summary of Contents for XP-503











































































Search results

Summary of Contents for XP-503

Reviews:

Related manuals for XP-503

Brands by name

Popular brands

Moeller XP-503, Manual

Search results

Summary of Contents for XP-503

Reviews:

Related manuals for XP-503

Brands by name

Popular brands