EN
99
Display
Operating Procedure
Description
“Technical” Programming
Eco Mode
• This parameter allows the technician to
set up a temperature to be maintained
in case of a temporary non utilization of
the espresso machine.
• It is possible to set this parameter also
during the normal operation of the
machine by pressing T1 and T2 at the
same time.
Enter Password
Eco Mode
Settings
Enter Password
1
After accessing the “Technical” programming menu and entering the password, use the buttons T1
and T2
until the following screen is displayed.
Eco Mode
Settings
2
Press the T3 button
to enter the menu.
Eco Mode Temp
-10.0°C
3
Press the T3 button
to enter the menu, move between the parameters with the buttons T1
and T2
to
set the desired temperature, press the T3 button
to confirm the value.
Auto Eco Time
30
4
Press the T3 button
to enter the menu, move between the parameters with the buttons T1
and T2
to
set the desired time (in minutes), press the T3 button
to confirm the value. A value of “0” (zero) disables
the Eco Mode parameter.
Summary of Contents for AV 1
Page 29: ...EN 29...
Page 110: ......