EN
77
Display
Operating Procedure
Description
“Technical” Programming
↑
Short Dose
30
8
Press the button T1 or T2 to view the dose. Pressing the button T3
, the dose value will blink. Use the
button T1 or T2 to change the value, press the button T3
to confirm the desired value.
↑
Long
BACKFLUSH
9
Press the T3 button
to access the menu, then navigate using T1
and T2
to choose between
DOSE
,
BACKFLUSH
,
3 SEC RINSE
and
CONTINUOUS
, press the T3 button
to confirm the option.
↓
Short
DOSE
10
Press the T3 button
to access the menu, then navigate using T1
and T2
to choose between
DOSE
,
BACKFLUSH
,
3 SEC RINSE
and
CONTINUOUS
, press the T3 button
to confirm the option.
↓
Short Program
Volume Dose
11
Press the T3 button
to start the doses programming procedure.
• This parameter allows the operator to
program the amount of coffee (brewing
amount) for each Selection Indicator.
• The brewing amount can be set in terms
of time (sec.), pulses, mass or brewratio.
• Once programmed, the Selection
Indicator remains lighted.
• It is possible to set the dose for both
a short and a long shot on the same
Selection Indicator.
• PULSE mode: control of doses in volume
• MASS mode: control of doses in mass
• BREW RATIO mode: ratio between the
coffee powder and the weight of the
drink
Program Dose
Group Dose
Settings
Group 1 Dose
Settings
Summary of Contents for AV 1
Page 29: ...EN 29...
Page 110: ......