EN
49
Display
Operating Procedure
Description
“Barista” Programming
↑
Short
DOSE
5
Press the T3 button
to access the menu, then navigate using T1
and T2
to choose between
DOSE
,
BACKFLUSH
,
3 SEC RINSE
and
CONTINUOUS
, press the T3 button
to confirm the option.
↑
Short Program
Volume Dose
6
Press the T3 button
to start the doses programming procedure.
Press Enter
To Exit
Press b To Stop
10 pulses
7
To set the brewing time of a short shot, it will be necessary to activate the tap lever until water flows from the
group, activate again the tap lever to stop and store the desired dose.
G1B1 Saved
10 Pulses
• This parameter allows the operator to
program the amount of coffee (brewing
amount) for each Selection Indicator.
• The brewing amount can be set in terms
of time (sec.), pulses, mass or brewratio.
• Once programmed, the Selection
Indicator remains lighted.
• It is possible to set the dose for both
a short and a long shot on the same
Selection Indicator.
• PULSE mode: control of doses in volume
• MASS mode: control of doses in mass
• BREW RATIO mode: ratio between the
coffee powder and the weight of the
drink
Program Dose
Group Dose
Settings
Group 1 Dose
Settings
Summary of Contents for AV 1
Page 29: ...EN 29...
Page 110: ......