EN
56
Display
Operating Procedure
Description
“Barista” Programming
Group Dose
Settings
Scale
Configuration
Scale Configuration
• This parameter allows the operator to
view and manually change each dose for
each Selection Indicator.
• For greater accuracy and consistency of
the doses, it is recommended that you
set each Selection Indicator.
• The dose can be set by pulses or by
mass (weight).
G1
█
MODBAR G2
█
163Puls 0Puls
1
When the espresso machine is turned on, press and hold the T3 button
to access the “Barista” programming.
After about 5 seconds the following screen is displayed.
Group Dose
Settings
2
Move between the parameters using the buttons T1 or T2 until the display shows:
Scale
Configuration
3
Press the T3 button
to start the doses programming procedure.
Scale Tare Time
3s
4
Press the T3 button
to enter the menu, navigate the parameters using the buttons T1
and T2
to set the
desired value. This parameter is common to all groups.
(only on ABR espresso machine models)
Summary of Contents for AV 1
Page 29: ...EN 29...
Page 110: ......