112
/126
D14D Camera Manual: Operating The Camera
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
Activate event control and recording:
•
By factory default, the MOBOTIX camera's
event control is disabled. Click on the
Arm & Record
button to activate event control.
This will activate video motion detection and recording. Cameras with integrated
flash memory (MOBOTIX R models and models with SD card) will use the flash
memory by default to store the image and video data (recording target). If desired,
you can set additional events and adjust the settings of the recording and storage
parameters (
Setup Menu > Event Settings
,
Setup Menu > Recording
and
Admin
Menu > recording to external File Server / Flash Device
).
=> (
Software Camera Manual Part 2, Chapter 7 and Chapter 8)
Set up actions/messaging:
•
Upon detecting an event, the MOBOTIX camera can
trigger alarms. These alarms can be adjusted to your needs and you can assign
them to one or more events: playing back a sound alarm on the camera speaker,
showing the visual alarm in the camera live image, sending an e-mail or network
message with the alarm image, placing a phone call, uploading an alarm image
to an FTP server, switching a signal output line of the camera (e.g. for switching on
the lights/opening a door).
For the settings, see
Setup Menu > Action Group Overview
. The actions to be
performed are defined and used in these action groups in the form of “action profiles”.
The different action profiles can also be defined in the following areas: Admin Menu
in the Hardware Configuration (profiles for signal output), Transfer Profiles (FTP, email,
network messages) and Sound and VoIP Telephony (sound profiles, VoIP profiles). For
more information, see the online help for the camera (see Section 3.7.11).
