113
/126
Configuration In The Browser
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [email protected]
Additional Configuration Options
3.6.3
•
Administering the camera:
You can modify the camera configuration in the
Administration Menu or the Setup Menu.
•
Admin Menu:
This menu contains the basic configuration dialogs of the camera
(for example, passwords, interfaces, software updates).
•
Setup Menu:
This menu contains the dialogs for configuring the image, event,
and recording parameters. Some of these settings can be changed using the
corresponding Quick Controls in the live screen.
resetting changes:
•
If you would like to reset some larger changes in one dialog
without resetting the complete configuration, you can use the
Default
button at the
bottom of the dialog to reset only this dialog's settings to the factory defaults. If you
would like to reset all image settings, you can do so using the
Manage Settings >
Restore Image Settings
Quick Control in the live image of the camera.
Storing the configuration permanently: Once you have finished configuring the camera,
•
you should always store the settings in the camera's permanent memory. You can
do so in each dialog (clicking on the
Set
button at the bottom of each dialog will
temporarily implement the change; when you click on
Close
, you will be asked to
store the complete configuration in the camera's permanent memory) or in the
Admin Menu (
Admin Menu > Store current configuration into flash memory
).
The
Configuration
section of the Administration menu provides more functions for
storing, copying, and managing camera settings. For more information on this topic,
see Chapter 5
Basic Camera Configuration in the Camera Software Manual Part 2.
Time tasks and time synchronization: Apart from a multitude of possibilities for
•
controlling the camera using time (time tables, holidays and vacations, scheduled
tasks, etc.), the camera can also synchronize its internal clock. This allows you to
keep the camera in synch manually with a computer or fully automatic using a time
server or another MOBOTIX camera. The camera can use either NTP time servers or
Time Protocol servers. For additional information, see Section 5.4.2
Date and Time/
Time Zones and Time Servers in the Camera Software Manual Part 2.
The
•
“More”
and
“Less”
buttons: When opening some of the camera dialogs, the camera
only shows the most important parameters. These dialogs have a
More
button in the
bottom right-hand corner; click it to display additional options. If all options are displayed,
click on the
Less
button to hide the additional options.
More: Display
advanced features
Less: Hide advanced
features
Automatic time
synchronization using
a time server
Make sure to
permanently store
changed parameters!
User Name:
admin
password:
meinsm
