Mobatime 122031, Mounting And Instruction Manual

Page: 32 / 124

© MOBATIME 32 / 124 801214.10
6.5.6 E1 signals
The DTS 4160 is equipped with 1 E1 Interfaces. The E1 signal is available on the BNC
(unbalanced) or on the RJ48 (balanced) connector.
DTS 4160.grandmaster Moser-Baer AG
====================================
E1 OUTPUT 1
1 Mode (0=off, 1=on) 1
2 Port unbalanced
3 Framing 1
4 CRC (0=off, 1=on) 1
98 Return and save
99 Return and discard changes
Enter desired menu number>
Path: 2 Configuration

1 Outputs

5 E1 signals

E1 out 1
1. Mode of E1 signal: 0 = off, 1 = on
2. Port: 0 = unbalanced (BNC), 1 = balanced (RJ48)
3. Framing: 0 = off, 1 = on
4. CRC: 0 = off, 1 = on
6.5.7 NTP slave clocks / time zone server
NTP slave clock line for operating slave clocks on the LAN (Ethernet). With this clock
line, a world time function can be realized.
DTS 4210.timecenter Moser-Baer AG
====================================
NTP SLAVE CLOCKS AND TIME ZONE SERVER
1 Mode(0=off 1=NTP 2=NTP+TZ 3=TZ 4=TZ poll) 0
2 Multicast address
3 Multicast port 65534
4 Pollinterval for NTP 0
5 Packet time to live (hops) 1
6 Repeat time to send TZ-tables (sec) 60
7 Delay time between packets (sec) 1
8 Configure time zone table
98 Return and save
99 Return and discard changes
Enter desired menu number>
Path: 2 Configuration

1 Outputs

5 NTP slave clocks / time zone server
1. Mode of clock line: 0 = off, 1 = Send NTP multicast, 2 = Send NTP multicast and
time zone table, 3 = Send time zone table, 4 = Time zones on request, 5 (only for
maintenance) = Send an empty time zone table and return to previous mode.
2. Multicast adress for NTP and time zone server: 239.192.54.x
Group address: x = 1-15 for MOBATIME devices, e.g. NMI, SEN 40.
3. Multicast port for Time zone server (enter an arbitrary value, empty is not allowed!
Value e.g.: 65534). The port is also needed for requesting time zone entries
(mode 4).