What is it and why should I care?
RE-Engineering
RE-Engineering
Normally when a product is engineered to perform a certain way the design is
made to accommodate basic physical functions. How something fits and is
secured in its normal operating destination is all handled in the original design.
Moog engineered the Minitaur to fit in its own custom enclosure. You are now
purposefully removing it from its comfy enclosure and are now re-purposing it
into a different use. YOUR EURORACKING the sucka!
YOU ARE VOIDING YOUR WARRANTEE!!!
To some of you, that might freak you out! It is understandable. Even more so
as you review this DIY manual and review the steps it will take to make it work in
eurorack.
If you later on decide to put it back into its original enclosure it might not work
without reversing some of these steps.
ONE LAST THING TO REMEMBER AS YOU GO THROUGH THIS KIT!
Please realize I have performed this modification on at least three dozen Minitaurs.
I have tried to design this re-engineering procedure to make it as painless as
possible. It however is not pain free!
Please review this ENTIRE manual FIRST! Once familiar you may decide you
want to go your own way on a couple of steps. This is ok and I fully encourage
you to do so. If you find a better way to do something, please let me know. I
am always willing to learn and share.
Since I am RE-Engineering, I have had to make compromises that normally would
not have to be made if I had originally engineered the Minitaur. These
compromises have been thoroughly thought through and while not perfect, I
believe they are the best solutions based on an entry level perspective for the
masses!
What if I get in over my head?
If you are unable to complete, or even start your DIY kit, contact me about
doing it for you. I charge a $75.00 fee, not including shipping to or from
Denver, Colorado USA. [email protected]
