![MMM MINITAUR Diy Manual Download Page 18](http://html1.mh-extra.com/html/mmm/minitaur/minitaur_diy-manual_1813964018.webp)
Find both aluminum standoff's and score
one of the ends on both. Make sure to
score them several times from different
directions. Using the supplied screws, mount
them into the only two mounting holes on
the back circuit board, so that the scored ends
of the standoff's are pointing away from the
circuit board, as pictured above.
Peel one side of the backing away from the
adhesive block and firmly press onto the
USB and power connector.
DON'T PEEL BOTH SIDES, just one for now!
Flip the circuit board over and rest it and
check to make sure it is sitting level on the
front circuit board.
WE ARE JUST TEST FITTING IT NOW!
Step#15
Step#15