Light
Green
Pink
Blue
Orange
Grey
Purple
Brown
Green
Align the jacks and then tighten
them down. If some are out of
alignment, then gently nudge
them back into place and
tighten them down. This is
easier to do now that you have
the copper ground wire holding
all of them.
After tightening them down,
make sure the jacks have not
spun slightly behind the panel.
If they have, straighten them
back.
Prep the rest of the wires by
trimming back the wire's
plastic insulation and solder
them by color to the posts
When there is no plug inserted to the top three jacks, their connections must be forced to ground.
To do this, bend the tabs on the other side inward toward the ground wire and solder them directly
to the ground wire.
Step#14
Step#14
