The MIDI jack itself can stay, but the top part sits up too high and
we want to be as 'skiff friendly' as possible, so the top plastic part
of the jack needs to be clipped down.
Carefully remove the metal shroud, by bending it back and forth
until it snaps off. Then use a set of wire clippers and make
several cuts and round off the top so it looks similar to the pic
below.
Obviously I used my de-soldering gun to remove the jacks as
pictured. Yours will still be there and that is ok.
Congrats, the back is done, let's move back to the front.
Step#11
Step#11
