12
em
ergency
door
opening
1. To insert a thin object (screwdriver, rod etc.)
through the air hole of the door (in the bottom
door surface) under the angle of ca 45 ° in the
distance of ca 90 mm from the door edge.
EMERGENCY DOOR OPENING
(use it only in case of failure or power failure)
1. To insert a thin object (screwdriver, rod etc.) through the air hole of the door
(in the bottom door surface) under the angle of ca 45 ° in the distance of ca 90 mm from
the door edge.
2. To push in the arrow direction and thus to push away the blocking rod (10-15 mm is
enough). In case of standard model – of the right door in the arrow direction, in case of
the non-standard model – of the left door – it would be reversely (always in the direction
from handle to the door hinges).
3. To open the door by means of the door handle
If it would be not possible to move away the blocking rod of the door – see above, then it
would be necessary to unscrew the whole blocking mechanism underneath (4x M4
screws) and to push it away as a whole. After such intervention, the service work is
necessary (backward blocking mechanism assembly).
Instructions for use
LSI_K_np_en 1206_mmm_V2.08_B2V
37
EMERGENCY DOOR OPENING
(use it only in case of failure or power failure)
1. To insert a thin object (screwdriver, rod etc.) through the air hole of the door
(in the bottom door surface) under the angle of ca 45 ° in the distance of ca 90 mm from
the door edge.
2. To push in the arrow direction and thus to push away the blocking rod (10-15 mm is
enough). In case of standard model – of the right door in the arrow direction, in case of
the non-standard model – of the left door – it would be reversely (always in the direction
from handle to the door hinges).
3. To open the door by means of the door handle
If it would be not possible to move away the blocking rod of the door – see above, then it
would be necessary to unscrew the whole blocking mechanism underneath (4x M4
screws) and to push it away as a whole. After such intervention, the service work is
necessary (backward blocking mechanism assembly).
EMERGENCY DOOR OPENING
(use it only in case of failure or power failure)
1. To insert a thin object (screwdriver, rod etc.) through the air hole of the door
(in the bottom door surface) under the angle of ca 45 ° in the distance of ca 90 mm from
the door edge.
2. To push in the arrow direction and thus to push away the blocking rod (10-15 mm is
enough). In case of standard model – of the right door in the arrow direction, in case of
the non-standard model – of the left door – it would be reversely (always in the direction
from handle to the door hinges).
3. To open the door by means of the door handle
If it would be not possible to move away the blocking rod of the door – see above, then it
would be necessary to unscrew the whole blocking mechanism underneath (4x M4
screws) and to push it away as a whole. After such intervention, the service work is
necessary (backward blocking mechanism assembly).
2. To push in the arrow direction and thus to
push away the blocking rod (10 -15 mm is
enough). In case of standard model – of the
right door in the arrow direction, in case of
the non-standard model – of the left door – it
would be reversely (always in the direction
from handle to the door hinges).
3. To open the door by means of the door handle
If it would be not possible to move away the
blocking rod of the door – see above, then
it would be necessary to unscrew the whole
blocking mechanism underneath (4x m4
screws) and to push it away as a whole.
after such intervention, the service work is
necessary (backward blocking mechanism
assembly).
EMERGENCY DOOR OPENING
(use it only in case of failure or power failure)
1. To insert a thin object (screwdriver, rod etc.) through the air hole of the door
(in the bottom door surface) under the angle of ca 45 ° in the distance of ca 90 mm from
the door edge.
2. To push in the arrow direction and thus to push away the blocking rod (10-15 mm is
enough). In case of standard model – of the right door in the arrow direction, in case of
the non-standard model – of the left door – it would be reversely (always in the direction
from handle to the door hinges).
3. To open the door by means of the door handle
If it would be not possible to move away the blocking rod of the door – see above, then it
would be necessary to unscrew the whole blocking mechanism underneath (4x M4
screws) and to push it away as a whole. After such intervention, the service work is
necessary (backward blocking mechanism assembly).
EMERGENCY DOOR OPENING
(use it only in case of failure or power failure)
1. To insert a thin object (screwdriver, rod etc.) through the air hole of the door
(in the bottom door surface) under the angle of ca 45 ° in the distance of ca 90 mm from
the door edge.
2. To push in the arrow direction and thus to push away the blocking rod (10-15 mm is
enough). In case of standard model – of the right door in the arrow direction, in case of
the non-standard model – of the left door – it would be reversely (always in the direction
from handle to the door hinges).
3. To open the door by means of the door handle
If it would be not possible to move away the blocking rod of the door – see above, then it
would be necessary to unscrew the whole blocking mechanism underneath (4x M4
screws) and to push it away as a whole. After such intervention, the service work is
necessary (backward blocking mechanism assembly).
