EA-1 User Manual
54
l) If using StarLab 3.30(+), the IP address will have to be set up correctly in the settings screen. Look for this icon in
the Select Devices screen (below). The EA-1 device should be detected in the "Available Devices" list. Add the device
to the list of "My Devices" by clicking "Add". See full instructions in the StarLab Manual.
m) The user should be aware that the next time the PC is started, it is possible its IP settings will have changed. If this
is the case, the same process as above will need to be repeated, using IPCONFIG to check what the new IP address
settings are.