EA-1 User Manual
21
Choosing Measurement Range:
Choose the power or energy range using the drop down “Range” menu as shown:
In most cases, an AUTO range option is available, allowing the sensor to choose its own best measurement range
based on the present power incident on sensor. Alternatively the customer can choose manually from the available
ranges, shown in descending order. Note that in Energy Mode, AUTO ranging is not available.
Choosing Wavelength Option, Discrete Laser Points:
For many thermopile sensors, discrete laser points are offered. In this case the user can choose between several pre-
defined laser wavelengths or regions, depending on the sensor being used. In the example below the laser options
are CO2 (10.6um) YAG (1.064um) or VIS (around 532nm). But other sensors may have other regions defined.
Choose the appropriate setting using the drop-down menu and clicking on the chosen option.