EA-1 User Manual
23
Select the wavelength option to remove and click on “Remove”, and that wavelength will be removed from the list.
After making any selection or modifying the favorites, if the user wants to keep the present setup after the next
startup, he can click on the Save Startup button as mentioned below.
Saving the Startup Settings:
In order to save the present settings of measurement range and favorite wavelength as the default startup settings,
click on the “Save Startup” button:
Sending User Commands:
In order to send a user command, clock in the “Send Command” window, type the command and click on “Send”.
The response will appear to the right of the “Send” button. In this case, it is not necessary to add the “$” symbol in
front of each command, as it is added automatically by the application:
A detailed list of user commands is added below.
Measuring Energy:
Some thermopile sensors offer single-shot energy measurements in addition to measuring power. Click on the
“Energy” button in the main sensor screen to open up the Energy screen: