MKS Baratron 740C, Manual, Page: 67 / 84

Chapter Five: Type R7xxC Relay System Setup
57
Figure 19: Location of the Trip Point Adjustments
Mounting Instructions
How To Mount the Bracket onto the Relay Module
1. Position the bracket over the rear panel of the Relay Module.
Ensure that the holes in the large rectangular part of the bracket align with the mounting
holes on the Relay Module (refer to Figure 16, page 55). Also, ensure that the small part
of the bracket which is bent at a right angle is positioned at the top of the Relay Module
so that it points
away from the connectors.
2. Secure the bracket in place with the four (4) 4-40 pan head screws.
Trip Point
Adjustments