MKS 1579A, Instruction Manual

Page: 57 / 87

1579A/579A Chapter 6: Operation (Profibus Units)
57
PROFIBUS Setup
GSD Files Usage
A GSD File describes the device and defines the configuration (Parameter) for the actual
application. The 1579PB may have different configurations: Small Setup, Full Setup and
Calibration table. The Standard GSD file uses a default parameter set in the Small Setup structure.
Others may be defined.
The 1579PB is a device, which normally would be looked at, as one module. This is also the
definition in the standard GSD File. But it could be an advantage, to look at it as a device, which
consists of 4 modules, one for each data block type (digital input, analog input, digital output,
analog output). See the section of a GSD file with 4 module below.
Note:
At the release of this instruction manual the GSD file was FlowGSD.gsd.1179.R1.0.gsd from
6.2.03
;=================================================================
; GSD-File for 1179B MKS Instruments
; Date : 06.02.03 V1.2 SL
; File : "MKS1179.GSD"
;=================================================================
#Profibus_DP
;-------- <Unit-Definition-List> ---------------
GSD_Revision=2
Vendor_Name="MKS"
Model_Name="MKS1179B00"
Revision="B"
Ident_Number=0x1179
Protocol_Ident=0 ; PROFIBUS DP
Station_Type=0 ; DP Slave
FMS_supp=0
Hardware_Release="R013"
Software_Release="V1.07"
Implementation_Type="SPC3"
;Bitmap_Device=""
;Bitmap_SF=""
; supported Baudrate
9.6_supp=1
19.2_supp=1
93.75_supp=1
187.5_supp=1
500_supp=1
1.5M_supp=1
3M_supp=1
6M_supp=1
12M_supp=1
; Default TSDR