IPB-5000A
6. Discription of Display Screens
6-14
(
e
)
SCHEDULE#
Fixes the method of how to select a schedule.
EXT. (NP):
Select a schedule by closing a schedule-selecting
terminal on Rear Panel
EXT. (P) :
Select a schedule by closing a schedule-selecting
terminal and a parity terminal on Rear Panel.
PANEL :
Select a schedule on Front Panel.
Input a parity signal so that the total number of a closed schedule-selecting
terminal and a closed parity terminal may be odd.
(
f
)
END SIG. TIME
Set the time period of outputting End signal and GOOD signal.
10/100ms:
Outputs End signal for the period of 10ms or 100ms.
HOLD :
Outputs End and GOOD signal for the period which 2ND
STAGE terminal is closed. But if it is closed for 10ms or less,
the signals are output for 10ms. If it is longer than 10ms,
they are output for the closed period of 2ND STAGE
terminal.
(
g
)
MONITOR MODE
Set the mode of a displayed monitor value.
EXCLUDE SLOPE:
Slope period not included.
INCLUDE SLOPE :
Slope period also included.
(
h
)
PARITY/WE1STOP
Set the way how Parity terminal is used.
PARITY :
Parity terminal used.
WE1STOP :
WE1STOP terminal used.
(
i
)
LCD CONTRAST
Adjust the contrast of Screen.
Press
+Key
and then
ENTER Key
to make letters thinner.
Press
+Key
and then
ENTER Key
to make letters darker.
②
STATUS (2/2) Screen
(
a
)
TRANS SCAN MODE
It is a preparatory setting function. Do not change it.
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j) (k) (l)
