IPB-5000A
6. Discription of Display Screens
6-8
(6) ENVELOPE Screen
Here, the envelope waveform is prepared.
The function of Envelope is to draw a waveform (here, calling Envelope Waveform)
having allowable criteria based on a standard waveform (an average actual weld
waveform) and compare a monitored actual weld waveform with the Envelope
Waveform in order to judge “Good” or “No Good” weld.
If the measured value is inside the Envelope Waveform, “Good” is determined. If it is
outside, “No Good” is determined. If the monitored value equals to the Envelope
Waveform value, “Good” is determined.
If No Good is determined, an error signal of “NG” or “Caution” is output, so it can be
used to activate an alarm buzzer, alarm lamp, and so on.
Envelope Waveform
(a)
(
a
)
SCHEDULE #
Input No. of
SCHEDULE
to set the schedule.
(
b
)
TYPE
Indicates the type of selected standard waveforms,
CURR
,
VOLT
,
POWER
and
RESIST
. The standard waveform can be selected among the following
seven types of waveform.
Waveform How
to
Select Remarks
Set Current Waveform
Press
NEW Button
, next press
SCH(C) Button
on the displayed
screen.(From now on, the word
of
Button
is omitted here.)
Selectable only for
Constant Current Control and
Constant Current/Constant Voltage
Combination Control
Set Voltage Waveform
NEW
, next
SCH(V)
Selectable only for
Constant Voltage Control and
Constant Current/Constant Voltage
Combination Control
Set Power Waveform
NEW
, next
SCH(P)
Only for Constant Power Control
Monitored Current Waveform
NEW
, next
MON
, next
CURR
Monitored Voltage Waveform
NEW
, next
MON
, next
VOLT
Monitored Power Waveform
NEW
, next
MON
, next
POWER
Monitored Resistance Waveform
NEW
, next
MON
, next
RESIST
(
c
)
INTERVAL
Set the period of Envelope Waveform.
(
d
)
OFFSET
Set the upper and lower limit of Envelope Waveform.
(b)
(c)
(d)
(e)
(f) (g) (h)
