Mitutoyo MF 1010C Series, User Manual

Page: 7 / 88

No. 99MBA091A
v
●
Power cord
Use only the power cord supplied with this product. Please contact us if an abnormality
is observed on the power cord or power connector.
●
Removing the cover and disassembling the machine
This machine is precisely adjusted, and is comprised of high-voltage parts. In order to
prevent accident and to maintain the performance, do not absolutely remove the cover
on the machine.
●
Danger prevention
In order to prevent danger, do not use the machine in locations where volatile gases
could be generated.
●
Maintenance
Gently wipe off dirt from the machine using a lint-free and soft cloth. If the dirt is difficult
to remove, wipe it clean with a cloth soaked in neutral detergent, then wipe lightly with
a dry cloth or a cloth well-wrung after soaking in water. Do not use organic solvents
such as thinner or benzine.
●
Take special shielding measures when using the machine in the following
locations:
•
Where noise is generated due to static electricity
•
Near strong electric fields
•
Where power source lines pass nearby
•
Where there is a risk of radioactivity
•
Where the machine could be subject to corrosive gasses