Mitutoyo MF 1010C Series, User Manual

Page: 6 / 88

No. 99MBA091A
iv
Precautions for Use
●
This instrument is a measuring machine.
Do not use this instrument for any purpose other than such measurement.
●
This instrument is a precision machine.
Exercise great care when handling this machine. Never bump or apply excessive force
to any of the parts during operation.
●
Rectify the installation environments.
(For detailed information, refer to “Installation Environments”.)
•
Close to 20°C in ambient temperature.
•
Free of extreme humidity.
•
Free of dust and dirt.
•
Free of vibration.
●
Gently fix a workpiece on the stage.
If the stage glass or top face is subject to large impact, it could be damaged. Exercise
sufficient care in fixing a workpiece or a jig.
Particularly, pay attention so as not to apply an impact to the stage glass.
●
Turn off the power during connection and maintenance.
To avoid accidents or electric shock due to malfunction of the machine under operation,
be sure to turn off the power before performing connection or maintenance.
●
Please do not carry the measurement thing of 18kg or more alone.
Please do not carry the measurement thing to exceed 18kg alone for safety though
the maximum authorized freight mass of the stage is 20kg.
●
Power supply
Observe the following precautions regarding the power supply.
•
As a rule, the power distribution method should be a single-phase, two wire system
with one wire grounded. (Pay due attention to the polarity.)
•
Be sure to ground the system. (Protective grounding) (Class D grounding) * Consult a
qualified electrician or someone with equivalent knowledge for the power supply
arrangement and construction.
● Turn the power switch ON or OFF along the order
The counter may display error messages (E51,E52,E53) by the order which turns the
power supply of the microscope main unit and the peripheral equipment such as
personal computer on or off in the connection with some peripheral equipment, when
the peripheral equipment is being connected with the counter unit at RS232C.
Be sure to perform at the following order, when turning the power switch ON or OFF.
・
For ON
･･････
Peripheral equipment
→
Microscope main unit
・ For OFF ･････ Microscope main unit → Peripheral equipment