Mitsubishi PLK-E Series, Technical Manual

Page: 8 / 213

Explanations of basic screens, keys and operations
Explanations of Standard screen 1
The Standard screen 1 is explained in detail below.
The stitching data type for the current work holder position is displayed.
(FEED, SEW, TRIM, etc.)
The current number of stitches is displayed.
The total number of stitches (including the feed data, thread cutting code, end
code, and code data) will be displayed.
The total number of actual stitches (excluding the feed data, thread cutting code, end
code, and code data) will be displayed.
The operation is confirmed (Jogging in forward/reverse direction)
(1) If the work holder is lowered after home position return and the forward jogging direction
(upward arrow) is pressed, the XY table (work holder) will move according to the stitching data.
When the key is released, the operation will stop at that position. When the jog minus direction
(downward arrow) is pressed, the XY table (work holder) will move in the direction that the
stitching data returns. When the key is released, the operation will stop at that position.
(2) When the forward jogging direction (upward arrow) is held down, and the end of the stitching
data is reached, the operation will stop with the work holder lowered. If there is no error in the
input data, stitching can be started by turning the start switch ON. When the reverse jogging
direction (downward arrow) is held down, and the start of the stitching data is reached, the
operation will stop at that point. Stitching can be started by turning the start switch ON in that
state. The operation can also be reconfirmed with jogging operation.
(3) During operation, the presser bar lifting will lower at stitching sections in the stitching data, and
will rise at the feed data sections.
The stitching data is changed.
(Data in internal memory)
The sewing machine stitching
speed is increased.
The sewing machine stitching
speed is decreased.
The presser foot is moved up/down. (*2)
(The direction of the arrow (up/down) will
change according to the current state.)
Standard screen 2 opens.
The current stitching speed
setting value is displayed.
The pattern No. is displayed.
The pattern name is displayed.(*1)
… Home position return will be executed.
…
The menu window will open
… The Image screen will open.
(*1) The pattern name can have up to eight characters.
[3]-2