Mitsubishi PLK-E Series, Technical Manual

Page: 70 / 213

Methods of creating stitching data
2. Setting the reverse multiple stitching details
* The details are set on this screen.
(Press and , and set
the distance to 6.0, and the number of
times to 3.)
* After inputting the details, press
to set the data.
* The system will return to the input
method setting screen.
* Press to determine the set
values.
* The system will return to the arrow
input screen.
* Determine the B point with the linear
input procedures, and create a linear
line. (A straight line having reverse
multiple (stitching specification) will be
created.)
* After creating the linear line,
input .
3. Confirming the data
* Linear reverse multiple data has been
created.
Memo Direction
When creating multiple stitching to the left of the input stitching line, press (left side).
When creating multiple stitching to the right of the input stitching line, press (right side).
Memo Distance
This is the distance between the multiple stitching and adjacent line. Set between 0.0mm and
20.0mm. To input the distance data, press the DISTANCE key to invert the key. After that, input
the data using the numeric keys or the up/down arrow mark keys.
Memo Number of times
Set the number of multiple stitching layers. Set between 2 and 9. To input the number of times,
press the NUMBER OF TIMES key to invert the key. After that, input the data using the numeric
keys or the up/down arrow mark keys.
Memo
Or press the MULTI, REVERSE MULTI, OFFSET key on the arrow input screen to directly
display the MULTI, REVERSE MULTI, OFFSET setting screen.