Mitsubishi PLK-E Series, Technical Manual

Page: 83 / 213

Modification mode
(4) Changing the feed data to home position
An example for adding the A' point by adding one
stitch to the original stitching data, as shown on the left,
is explained in this section.
Add the A' point as shown on the left.
The B point to H point positions will change when the A'
point is added. Thus, the feed data from the H point to the
home position will also change.
The method for changing this feed data can be selected
with the following keys.
Add return Change return
[ Add return ] [ Change return ]
[Memo] Before modification, check the data. If the data on feed data from the sewing end point
to the home position includes code data, the feed data following the code data will be
modified.
[12]-3