Mitsubishi MSZ-YK09VA-H1, Operating Instructions Manual

Page: 37 / 54

Air flow velocity and direction adjustment
Press AREA button to select LEFT
AREA SETTING
Press AREA button to select AUTO Press AREA button to select RIGHT
To air-condition mainly the left area of
the room.
To air-condition the entire room.
The horizontal air flow direction and
indoor unit display are switched
according to the room temperature
(floor/wall).
To air-condition mainly the right area
of the room.
Remote controller button
Installed at
center
Installed at
left
Installed at
right
AREA AREA AREA AREA
Indoor unit
display
Control
range of
horizontal
air flow
direction.
The vertical
air flow
direction
conforms
to the
setting on
the remote
controller
(The
horizontal
air flow
direction is
controlled
in this
range.)
AREA setting
36
■
To change the airflow velocity, press the button. (Lo)→(Me)→(Hi)→(SHi)→(Auto).
How to select fan speed:
Principle of the air conditioner: The greater the air volume, the more effective the energy saving, and the higher the noise. The air
outlet temperature increases at cooling mode and decreases at heating mode. Therefore, selecting the fan speed of Lo enables
you to get a quiet environment for rest. Selecting the fan speed of Hi or SHi enables you to get an effective energy saving.
■
At the time of changing vertical airflow direction, press button.
Air flow with swing
Swing operation enables the airflow to reach all corners of a room.
Recommended scope for vertical airflow direction
Usually, please turn to (auto).
Turn to position (1) in cooling or dry mode.
Turn to position (2) ~ (4) in heating mode.
Select your favorable fan speed and airflow direction
Each press of the button enables the unit to change vertical airflow direction following the order of (1)
→
(2)
→
(3)
→
(4)
→
(swing)
→
(auto).
Cooling
Dry
Heating