How to install battery and set current time
Remove the frontal cover and install batteries.
Then, reinstall the cover. Insert the cathode of the batteries in
the first. Check if the polarity is correct.
1
Press the reset button.
Use sharp thing to press it.
2
4
Repress the Clock setting button and close the frontal cover.
①
Remove the front lid.
②
Be sure to set the slide switch inside the remote controller to an
appropriate position in accordance with the installed position of the
indoor unit. If the switch is not set correctly, the air conditioner may
not function properly.
Press
(forward) and
(backward) button (time
setting button), set current time.
Remote controller
5
HOW TO SWITCH OVER <REMOTE CONTROLLER>
First, insert the negative electrode
·
If the reset button is not pressed, the remote controller can’t
work normally.
·
Note that the pressing shall not be done forcibly.
Press the Clock setting button.
Use something sharp at the end to press it.
3
The details of SLIDE SWITCH
·
Each press of the Forward button increases one minute;
Each press of the Backward button decreases one minute.
·
If you press and hold down the button for a long time, the
set time will increase/decrease in ten minutes intervals.
Area
Left
Center
Right
Position of the slide
switch
Display on the
remote controller
Where is the indoor unit installed in the room?
(Left)
(Center)
(Right)
Installed at left, if the distance
is not more than 50cm.
Installed at right, if the distance is
not more than 50cm.
* If the indoor unit is installed more than 50 cm away from the side walls,
cabinets or other nearby objects, set the slide switch to the "center" position.
Switch
30
Preparation before operation
Signal transmitting section
Operation display section
Temperature button
OFF-TIMER button
ON-TIMER button
Time setting button
Forward button
Backward button
Clock setting button
Reset button
Operate/stop
(ON/OFF) button
Fan speed control button
Operation select button
Econo Cool button
Sleep control button
MOVE EYE button
Area setting button
Wide vane button
(Vertical vane button)
Vane control button
(Horizontal vane button)
Summary of Contents for MSZ-YK09VA-H1
