manualshive.com logo in svg

Mitsubishi MIRAGE, Service Manual

The Mitsubishi MIRAGE Owner's Manual is a comprehensive guide that provides essential information and instructions on operating your vehicle. Easily downloadable for free from our website manualshive.com, it allows you to enhance your driving experience by understanding your car's features and maintaining optimal performance.

Share
Download
background image

Bluetooth® 2.0 interface (if so equipped)

5-100 Features and controls

5

5. The voice guide will say “Importing the

contact list from the mobile phonebook.
This may take several minutes to com-
plete. Would you like to continue?”
Answer “Yes,” transferring to the mobile
phonebook the phonebook stored in the
cellular phone will start.
Answer “No,” the system will return to
the main menu.

6. When the transfer is complete, the voice

guide will say “Import complete” and
then the system will return to the main
menu.

N00566301092

MODEL: MMC FCC ID: CB2MDGMY10
IC: 279B-MDGMY10
Your Bluetooth

®

 2.0 interface operates on a

radio frequency subject to Federal Communi-
cations Commission (FCC) Rules (For vehi-
cles sold in U.S.A.) and Industry Canada
Rules (For vehicles sold in Canada). This
device complies with Part 15 of the FCC
Rules and RSS-210 of the Industry Canada
Rules. Operation is subject to the following
two conditions:

This device may not cause harmful inter-
ference.

This device must accept any interference
received, including interference that may
cause undesired operation.

The term “IC:” before the radio certification
number only signifies that Industry Canada
technical specifications were met.
The antenna used for this transmitter must not
be co-located or operating in conjunction
with any other antenna or transmitter. End-
users and installers must be provided with
installation instructions and transmitter oper-
ating conditions for satisfying RF exposure
compliance.
FCC Notice: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, use and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio com-
munications.
However, there is no guarantee that interfer-
ence will not occur in a particular installation.
If this equipment does cause harmful interfer-
ence to radio or television reception, which
can be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the
equipment and receiver.

NOTE

The transfer may take some time to complete
depending on the number of contacts.

If the Bluetooth

®

 2.0 interface could not be

connected to the Bluetooth

®

 compatible cel-

lular phone, the voice guide will say “Unable
to transfer contact list from phone” and then
the system will return to the main menu.

If you press the HANG-UP button or press
and hold the SPEECH button during the data
transfer, the transfer will be cancelled and
the system will return to the main menu.

If an error occurs during the data transfer, all
transfer will be cancelled and the voice guide
will say “Unable to complete the phonebook
import” and then the system will return to
the main menu.

If there are no contacts in the phonebook, the
voice guide will say “There are no contacts
on the connected phone.”

General information

 

CAUTION

Changes or modifications made to this
equipment not expressly approved by the
manufacturer may void the FCC authoriza-
tion to operate this equipment.

BK0212400US.book  100 ページ  ２０１４年４月１日　火曜日　午後２時２１分

Summary of Contents for MIRAGE













































































































































































































































































































Reviews:

No comments

Related manuals for MIRAGE

Jeep 2014 Wrangler Owner'S Manual preview
2014 Wrangler
Brand: Jeep Pages: 673
M7 SPEED R56 Installation Manual preview
R56
Brand: M7 SPEED Pages: 11
Subaru 2005 Baja Owner'S Manual preview
2005 Baja
Brand: Subaru Pages: 34
Pyle PLCMRV8B Black User Manual preview
PLCMRV8B Black
Brand: Pyle Pages: 4
Dometic Heki 2 Installation And Operating Manual preview
Heki 2
Brand: Dometic Pages: 158
Safe Fleet PRIME DESIGN URX-001-E Manual preview
PRIME DESIGN URX-001-E
Brand: Safe Fleet Pages: 8
Kia 2014 rondo Features preview
2014 rondo
Brand: Kia Pages: 11
Saab 2008 9-7x Owner'S Manual preview
2008 9-7x
Brand: Saab Pages: 426
JKS JKSOGS960 Installation Instructions Manual preview
JKSOGS960
Brand: JKS Pages: 6
Kia Picanto Manual preview
Picanto
Brand: Kia Pages: 680
Cadillac XLR-V Specifications preview
XLR-V
Brand: Cadillac Pages: 2
Buick Cascada 2016 Getting To Know Manual preview
Cascada 2016
Brand: Buick Pages: 20
BMW i wallbox Installation Instructions Manual preview
i wallbox
Brand: BMW Pages: 40
Rugged Ridge 13551.33 Manual preview
13551.33
Brand: Rugged Ridge Pages: 3
Overland Outfitters SHERPA SADDLE BAG JL Installation Instructions preview
SHERPA SADDLE BAG JL
Brand: Overland Outfitters Pages: 2
NavLinkz RL4-LR16-8 Manual preview
RL4-LR16-8
Brand: NavLinkz Pages: 26
Whispbar K408W Fitting Instructions Manual preview
K408W
Brand: Whispbar Pages: 15
Lincoln MKZ HYBRID 2016 Quick Reference Manual preview
MKZ HYBRID 2016
Brand: Lincoln Pages: 10

Brands by name

Popular brands

Load more brands