Mitsubishi MIRAGE Service Manual Download Page 15

Page: 15 / 300

If this problem occurs...

2-6

Quick index

Cannot shift the selector lever
from the “P” (PARK) position.
(for vehicles with continuously
variable transmission (CVT))

Shift the selector lever while pressing the brake pedal.
Check that the ignition switch or the operation mode is in ON.

P. 5-39

The windows are fogged up.

Vehicles equipped with the heater without air conditioning function or the manual air
conditioning

1. Set the mode selection dial to the “

” or “

” position.

2. Turn on the blower.

Vehicles equipped with the automatic air conditioning

Push the defogger switch to change the “

” mode.

P. 7-6, 7-10,

7-13

The engine does not start.
The lights do not come on.
The lights are dim.
The horn does not honk.
The horn sound is weak.

Have the battery checked. Recharge or replace as needed.

P. 8-2,

P. 9-10

The high coolant temperature
warning light is illuminates.

Steam comes out of the engine
compartment.

The engine is overheated.
Carefully stop the vehicle in a safe place.

P. 8-4

Problem

Do this

Ref. Page

BK0212400US.book 6 ページ２０１４年４月１日　火曜日　午後２時２１分

Summary of Contents for MIRAGE













































































































































































































































































































Search results

Summary of Contents for MIRAGE

Reviews:

Related manuals for MIRAGE

Brands by name

Popular brands

Mitsubishi MIRAGE, Service Manual

Search results

Summary of Contents for MIRAGE

Reviews:

Related manuals for MIRAGE

Brands by name

Popular brands