manualshive.com logo in svg

Mitsubishi MIRAGE, Service Manual

Share
Download
Mitsubishi MIRAGE Service Manual Download Page 170

Rear shelf panel (if so equipped)

Features and controls 5-109

5

There are bottle holders located on the front
doors.

N00528200096

1. Insert the concave portion (A) on the

underside of the rear shelf panel into the
inside protruding portion (B) of the rear
pillar.

2. Hang the strap (C) of the rear shelf panel

on the hook (D).

Follow this procedure in reverse to remove.

N00574700014

Convenience hook is located on the seatback
of the passenger’s seat.

NOTE

Do not store cup or drink can in the bottle
holder.

Make sure all lids are tightly closed when
storing beverages that are in plastic bottles,
etc.

Some beverages may not be stored, depend-
ing on the size and shape of the plastic bot-
tles, etc.

Rear shelf panel

 (if so equipped)

CAUTION

Do not place luggage or other items on the
rear shelf panel. Any items on the rear shelf
panel would obstruct your rearward view,
and they could fly forward and cause injuries
or other mishap in the event of hard braking.

To install

 

CAUTION

Lightly push the rear shelf panel to make
sure that the concave portion (A) is set
firmly in the protruding portion (B) of the
liftgate. If the rear shelf panel is not securely
locked in place, it could unhook while driv-
ing and cause injuries.

To remove

 

Convenience hook 

BK0212400US.book  109 ページ  ２０１４年４月１日　火曜日　午後２時２１分

Summary of Contents for MIRAGE













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands