manualshive.com logo in svg

Mitsubishi MIRAGE, Service Manual

Share
Download
Mitsubishi MIRAGE Service Manual Download Page 48

Supplemental Restraint System (SRS) - airbag

Seat and restraint systems

4-23

4

N00407800522

The SRS includes the following components:

The airbag control unit monitors the readiness
of the electronic parts of the system whenever

WARNING

NEVER put REAR-FACING CHILD
RESTRAINT SYSTEMS or INFANT
RESTRAINT SYSTEMS in the front pas-
senger seat. This places the infant too
close to the passenger’s airbag. During
deployment of that airbag, the infant can
be seriously injured or killed.
Rear-facing child restraint systems or
infant restraint systems must only be used
in the rear seat.

Airbag

WARNING

FRONT-FACING CHILD RESTRAINT
SYSTEMS should be used in the rear seat
whenever possible. If they must be used in
the front passenger seat, move the seat to
the most rearward position and make sure
the child stays in the child restraint sys-
tem, properly restrained. Failure to follow
these instructions could result in serious
injury or death to the child.

WARNING

Older children should be seated in the
rear seat with their seat belt properly
worn, and with an appropriate booster
seat if needed.
Refer to “Children who have outgrown
child restraint systems” on page 4-20.

How the Supplemental 
Restraint System works 

1- Curtain airbag modules
2- Airbag module (Driver)
3- Passenger’s airbag off indicator
4- SRS warning light
5- Airbag module (Passenger)
6- Front impact sensors
7- Side airbag modules
8- Driver’s seat position sensor
9- Passenger’s seat occupant classifica-

tion sensor system

10- Side impact sensors

11- Airbag module (Driver’s knee)

12- Airbag control unit

BK0212400US.book  23 ページ  ２０１４年４月１日　火曜日　午後２時２１分

Summary of Contents for MIRAGE













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands