manualshive.com logo in svg

Mitsubishi MIRAGE, Service Manual

Share
Download
Mitsubishi MIRAGE Service Manual Download Page 105

Service brake

5-44

Features and controls

5

Prior to moving off after having stopped the
vehicle, make sure that the selector lever is in
“D” (DRIVE) position.

To park the vehicle, first bring it to a com-
plete stop, fully engage the parking brake,
and then move the selector lever to the “P”
(PARK) position.

If the CVT does not shift while driving, or
your vehicle does not pick up enough speed
when starting on an uphill slope, it may be
that there is something unusual happening in
the transmission, causing a safety device to
activate. Have your vehicle checked at an

authorized Mitsubishi Motors dealer or a
repair facility of your choice as soon as possi-
ble.

N00517500318

Overuse of the brake can cause weakening,
resulting in poor brake response and prema-
ture wear of the brake pads.
When driving down a long or steep hill, use
engine braking by moving the selector lever
to “B” (BRAKE) position.

N00517600436

Your vehicle is equipped with power brakes
for more braking force with less brake pedal
effort.
Your brakes are designed to operate at full
capacity, even if the power assist is not being
used.
If the power assist is not being used, the effort
needed to press the brake pedal is greater.
If you should lose the power assist for some
reason, the brakes will still work.
If the power brake unit or either of the two
brake hydraulic systems stops working prop-
erly, the rest of the brake system will still
work, but the vehicle will not slow down as
quickly.
You will know this has happened if you find
you need to press the brake down farther, or
harder when slowing down or stopping, or if
the brake warning light and the warning dis-
play in the multi-information display come
on. Have the brake system repaired at an

CAUTION

To avoid transmission overheating, never try
to keep your vehicle stationary on a hill by
using the accelerator pedal. Always apply
the parking brake and/or service brake.

Do not rev the engine unnecessarily while
the vehicle is stationary. Unexpected acceler-
ation may occur if the selector lever is in a
position other than “P” (PARK) or “N”
(NEUTRAL).

Parking

 

When the CVT makes no speed 
change

 

Service brake 

Brake pedal 

WARNING

Do not leave any objects near the brake
pedal or let a floor mat slide under it;
doing so could prevent the full pedal
stroke that would be necessary in an
emergency. Make sure that the pedal can
be operated freely at all times. Make sure
the floor mat is securely held in place.

CAUTION

It is important not to drive the vehicle with
your foot resting on the brake pedal when
braking is not required. This practice can
result in very high brake temperatures, pre-
mature lining wear, and possible damage to
the brakes.

Power brakes 

BK0212400US.book  44 ページ  ２０１４年４月１日　火曜日　午後２時２１分

Summary of Contents for MIRAGE













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands