manualshive.com logo in svg

Mitsubishi MIRAGE, Service Manual

Share
Download
Mitsubishi MIRAGE Service Manual Download Page 102

Continuously variable transmission (CVT) (if so equipped)

Features and controls

5-41

5

N00563300049

When the selector lever cannot be shifted
from the “P” (PARK) position to another
position while the brake pedal is pressed and
held down with the ignition switch or the
operation mode in ON, the battery may be flat
or the shift-lock mechanism may be malfunc-
tioning.
Immediately have your vehicle checked by an
authorized Mitsubishi Motors dealer or a
repair facility of your choice.
If you need to move the vehicle, shift the
selector lever as follows.

1. Make sure the parking brake is fully

applied.

2. Stop the engine if it is running.
3. Insert a screwdriver with a cloth over its

tip into the notch (A) of the cover. Pry
gently as shown to remove the cover.

4. Depress the brake pedal with the right

foot.

5. Insert a screwdriver in the shift-lock

release hole (B). Shift the selector lever to
the “N” (NEUTRAL) position while
pressing the screwdriver down.

N00560400078

When the ignition switch is turned to the
“ON” position or the operation mode is put in
ON, the selector lever position is shown on
the multi-information display. 

N00560600067

This position locks the transmission to pre-
vent the vehicle from moving. The engine can
be started from the “P” (PARK) position.

When the selector lever cannot be 
shifted from the “P” (PARK) posi-
tion

 

Selector lever position display

 

Selector lever positions

 

“P” PARK

 

BK0212400US.book  41 ページ  ２０１４年４月１日　火曜日　午後２時２１分

Summary of Contents for MIRAGE













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands