Mitsubishi MELSEC QS Series, User Manual

Page: 36 / 264

2
- 1
2
PERFORMANCE SPECIFICATION
CHAPTER2 PERFORMANCE SPECIFICATION
Table2.1 shows the performance specifications of the CPU module.
*1 : The maximum number of executable sequence steps is as shown below.
(Program capacity) - (File heade size (default: 34 steps))
Refer to CHAPTER 5 for details of the program capacity and file.
*2 : Each of parameter, sequence program, SFC program, and device comment files can be stored.
*3 : The refresh mode batch-accesses I/O modules before start of sequence program operation.
Table2.1 Performance Specifications
Item QS001CPU Remarks
Control method Repetitive operation of stored program ----
I/O control mode
Refresh mode
*3
----
Program
language Sequence control
language
Relay symbol language, function block. ----
Processing speed
(sequence
instruction)
LD X0 0.10 s ----
MOV D0 D1
0.35 s
----
Constant scan
(Function for keeping regular scan
time)
1 to 2000ms
(Setting available in1ms unit.)
Setting by parameters.
Program capacity
*1
14k steps
(56k bytes)
Section 5.1.1
Section 5.1.2
Memory
capacity
*1
Program memory
(drive 0)
128k bytes
Section 5.1.2
Standard ROM
(drive 4)
128k bytes
Section 5.1.3
Max. number of
files stored
Program memory
3
*2
Section 5.1.2
Standard ROM
3
*2
Section 5.1.3
No. of times of writing data into the
standard ROM
Max.100000 times ----
No. of I/O device points 6144 points(X/Y0 to 17FF)
No. of points usable on
program
No. of I/O points 1024 points(X/Y0 to 3FF)
No. of points accessible
to the actual I/O module