Mitsubishi MELSEC L Series, User Manual

Page: 88 / 124

86
7.1
Setting Method
Configure the time settings in the Built-in Ethernet port tab of the PLC parameter dialog box.
Project window [Parameter] [PLC Parameter] [Built-in Ethernet Port Setting]
[Time Setting]
*2 Either of these two options must be selected.
Item Description Setting range
SNTP Function Setting Select whether to use this function or not. Used or Not used
SNTP Server IP Address Specify the IP address of the SNTP server.
0.0.0.1 to
223.255.255.254
Time Zone
Specify a time zone in which the time is to be synchronized. Japan
Standard Time "GMT+9:00".is set by default. (GMT-12:00 to
GMT+13:00)
Execute time setting at turn ON/
reset Select whether to execute the time setting function upon power-on or reset
of the CPU module.
-
At Error Occurrence
Select whether to stop or continue the time setting when an error is
detected upon power-on or reset of the CPU module.
Continue or Stop
Execution Interval
*2
Select this when executing the time setting function at fixed time intervals. 1 to 1440 (min.)
Execution Time
*2
Select this when executing the time setting function at a specified time. (in
increments of 30 minutes)
00:00 to 23:30