Mitsubishi MELSEC L Series, User Manual, Page: 91 / 124

89
CHAPTER 8 FILE TRANSFER FUNCTION (FTP)
8
8.
1
S
e
tting f
o
r
F
T
P
Com
m
unicat
ion
8.1
Setting for FTP Communication
(1) Operation on the CPU module side
Project window [Parameter] [PLC Parameter] [Built-in Ethernet Port Setting]
1.
Set the IP address of the CPU module.
2.
Select "Enable online change (FTP, MC Protocol)" when data need to be written even while the
CPU module is in RUN state.
3.
Configure the FTP settings.
Item Description
FTP Select "Used".
Login Name Set a login name for file transfer request (log in) from the connected device. (Default: MELSEC)
Password
Set an FTP password for file transfer request from the connected device. To change the password, enter both old and
new passwords for confirmation. (Default: MELSEC)
Command Input
Monitoring Timer
Set a time for monitoring command input performed by the CPU module. When no command is input within the set
period of time, the FTP connection is disconnected. (Setting range : 1 to 32767 ( × 500ms))
Set a time value larger than the time required for file transfer.
1.
2.
3.