Mitsubishi MELSEC L Series, User Manual

Page: 94 / 124

92
8.2
Files Transferable Using FTP
The following table lists the files that can be transferred using the file transfer function.
:Available,
×
:N/A
*1 The SP.FWRITE or SP.FREAD instruction in the program will write or read the file respectively.
For details, refer to the following manual.
MELSEC-Q/L Programming Manual (Common Instructions)
*2 Files can be written to the program memory only when the CPU module is in the STOP state.
*3 Write destination is the program cache memory.
The user should back up files using the "pm-write" command as required. ( Page 94, Section 8.4.1)
*4 The following number of files can be stored using FTP.
[Maximum number of files storable on the drive - 1]
File type
Program
memory
*2 *3
Standard
RAM
Standard
ROM
*4
SD memory
card
*4
File name or extension
Drive 0 Drive 3 Drive 4 Drive 2
Parameter × × × PARAM.QPA
Intelligent function module
parameter
× × × IPARAM.QPA
Program × × × .QPG
Device comment × × × .QCD
Device initial value × × × .QDI
File register × × × .QDR
Local device × × × × .QDL
Sampling trace file × × × × .QTD
Programmable controller user data
*1
× × Arbitrary file name
Label programming invertible
conversion information
× × × × .C32
Drive heading × × × × QN.DAT
Device data storage file × × × × DEVSTORE.QST
Module error log file × × × × IERRLOG.QIE
Data logging setting file × × × ×
LOGCOM.QLG,
LOG01.QLG to LOG10.QLG
Data logging file × × × .CSV
Menu definition file × × × × MENUDEF.QDF
User-set system area × × × × -