Mitsubishi MELSEC L Series, User Manual

Page: 25 / 124

23
CHAPTER 3 CONNECTION OF PROGRAMMING TOOLS AND GOT
3
3.
2
S
e
tting
fo
r t
he Prog
ramm
ing
T
ool
3.2
Setting for the Programming Tool
Configure the settings in the "Transfer Setup" dialog box.
Connection Destination window [Connection1]
1.
Select "Ethernet Board" for "PC side I/F".
In the "PC side IF Ethernet Board Setting" dialog box, select a "TCP" or "UDP" protocol. ( Page 21,
Section 3.1 Select the same protocol as the one set in the Open Setting dialog box.)
2.
Select "PLC Module" for "PLC side I/F".
Enter the IP address or host name of the CPU module in the "PLC side I/F Detailed Setting of PLC
Module" dialog box, as shown below.
(For the host name, enter the name set in the Microsoft Windows hosts file.)
3.
Set "Other Station Setting".
Select an item appropriate to the operating environment.
2.
3.
1.