3 - 2 3 - 2
MELSEC-A
3 SPECIFICATION
3.2 Performance Specification
Table 3.2 indicates the performance specifications of the AJ65VBTCU-68DAVN.
Table 3.2 Performance Specifications
Item AJ65VBTCU-68DAVN
Protection class
IP1XB
Digital input
16-bit signed binary (-4096 to +4095)
Analog output
-10 to +10VDC (external load resistance: 2k to 1M )
Accuracy
Digital Input
Value
Analog Output Range Ambient temperature
0 to 55°C
Ambient temperature
25±5°C
Max.
Resolution
-10 to +10V
-4000 to
+4000
User range setting 1
(-10 to +10V)
±0.3%
(±30mV)
±0.2%
(±20mV)
2.5mV
0 to 5V
1.25mV
1 to 5V
Voltage
0 to 4000
User range setting 2
(0 to 5V)
±0.3%
(±15mV)
±0.2%
(±10mV)
1.0mV
I/O characteristics, maximum
resolution, accuracy
(accuracy relative to
maximum value of analog
output value)
Maximum conversion speed
1ms/channel
Output short-circuit protection
Provided
Absolute maximum output
±12V
Number of analog output
points
8 channels/module
CC-Link station type
Remote device station
(Ver.1 remote device station, Ver.2 remote device station)
Number of occupied stations
When Ver.1 remote device station (Ver.1-compatible slave station) is set:
3 stations
When Ver.2 remote device station (Ver.2-compatible slave station) is set:
1 station (Expanded cyclic setting: Quadruple)
Communication cable
Ver. 1.10 compatible CC-Link dedicated cable FANC-110SBH,
FA-CBL200PSBH, CS-110
Specific isolated area
Isolation
method
Dielectric
withstand voltage
Insulation resistance
Across communication system terminals
and all analog output terminals
Photocoupler
isolation
Across power supply system terminals and
all analog output terminals
Transformer
isolation
500V AC for
1 minute
5M or higher,
measured with 500V DC
insulation resistance
tester
Between channels
Not isolated
-
-
Isolation specifications
Noise durability
By noise simulator of 500Vp-p noise voltage, 1µs noise width and 25 to 60Hz noise frequency
External wiring system
One-touch connector for communication [Transmission circuit]
(5 pins pressure welding type, the plug for the connector is sold separately)
One-touch connector for power supply and FG [Unit power supply and FG]
(5 pins pressure welding type, the plug for the connector is sold separately)
One-touch connector for analog I/O
(4 pins pressure welding type, the plug for the connector is sold separately)
<Sold separately>
Online connector for communication : A6CON-LJ5P
Online connector for power supply : A6CON-PWJ5P
One-touch
connector for
communication
Communication line : Ver. 1.10 compatible CC-Link dedicated cable
0.5mm
2
(AWG#20) [ 2.2 to 3.0], shielded wire 0.5mm
2
(AWG#20)
One-touch
connector for
power supply/FG
0.66 to 0.98 mm
2
(AWG#18) [ 2.2 to 3.0]
Wire diameter 0.16 mm or more
Applicable
wire size
One-touch
connector for
analog I/O
1.0 to 1.4 (A6CON-P214), 1.4 to 2.0 (A6CON-P220) [Applicable cable : 0.14 to 0.2 mm
2
]
1.0 to 1.4 (A6CON-P514), 1.4 to 2.0 (A6CON-P520) [Applicable cable : 0.3 to 0.5 mm
2
]
TH35-7.5Fe, TH35-7.5Al (conforming to JIS C 2812)
Applicable DIN rail
CC-Link connector type metal installation fitting : A6PLT-J65V1
24V DC (20.4V DC to 26.4V DC, ripple factor within 5%)
Inrush current : 4.3A, within 1.2ms
External supply power
Current consumption 0.15A
Weight 0.16kg
3
