H2i-R2-258
PURY-HP-T(S)KMU,-Y(S)KMU (September 2014)
© 2014 Mitsubishi Electric US, Inc.
Ref: CMY_R100VBK_EXD_EUDB_SI
<Deformed pipe(Accessory)>
<Low-pressure pipe twinning kit(Accessory)>
High-pressure twinning pipe
Low-pressure pipe twinning kit
<Deformed pipe(Accessory)>
<Pipe for routing through the bottom
(Accessory)>
<Pipe for routing through the front
(Accessory)>
<Elbow pipe(Accessory)>
1"
3/4"
3/4"
(Outside diameter)
1"
(Outside diameter)
(Outside diameter)
(3Pcs.)
(Outside diameter)
(Outside diameter)
(Outside diameter)
1”
1”
1”
7/8"
3/4"
5/8”
3/4”
3/4"
7/8”
1-5/32”
3/4”
7/8"
7/8"
7/8"
1-5/32"
1-5/32"
1-3/32”
1”
21/32"
8-7/16”
4-17/32"
2-5/16"
7-17/32"
3-5/32"
2-3/8”
3-17/32”
1-1/4”
4-5/32”
2-15/32"
3-5/32"
1-13/32
”
5-1/4”
21/32”
6-15/16”
17-1/32”
2-15/32"
1-7/16”
1-7/16”
1-31/32"
1-31/32"
CMY-R100CBK2
The angle of the branch pipe for hign pressure is within against the horizontal plane.
2. Use the attached pipe to braze the port-opening of the distributer.
3. Pipe diameter is indicated by inside diameter.
4. Only use the Twinning pipe by Mitsubishi (optional parts) .
Note 1. Reference the attitude angle of the branch pipe below the fig.
Distributer
15
15
8. OPTIONAL PARTS
8-2. Twinning Kit
Twinning kit is needed to combine the refrigerant flows of the PURY-HP-TKMU/YKMU units for the combined
PURY-HP-TSKMU/YSKMU systems.
