Mitsubishi FX0N-32NT-DP, User Manual

Page: 20 / 58

FX0N-32NT-DP Profibus-DP Interface Unit Wiring and Mounting 2
2-2
2.1 Mounting
2.1.1 Arrangements
The 32NT-DP connects on the right side of the connected FX
0N
, FX
1N
, FX
2N
or FX
2NC
*1
series
main unit or extension unit/block (including special function blocks). For further information of
mounting arrangements, refer to the hardware manual of the connected main unit.
*1 When connecting to an FX
2NC
series PLC, an FX
2NC
-CNV-IF is required.
2.1.2 Mounting
The mounting method of the 32NT-DP can be DIN rail mounting or direct wall mounting.
1) DIN rail mounting
a) Align the upper side of the DIN rail mounting groove of the 32NT-DP with a DIN rail*1
( c ), and push it on the DIN rail( d ). See Figure 2.2.
b) When removing the 32NT-DP from the DIN rail, the hook for DIN rail is pulled (
e
), and
the 32NT-DP is removed ( f ). See Figure 2.2.
*1 Uses DIN 46277 <35mm (1.38")>