Mitsubishi FX0N-32NT-DP, User Manual

Page: 18 / 58

FX0N-32NT-DP Profibus-DP Interface Unit Introduction 1
1-6
1.4 Applicable PLC
For setting up a system, the 32NT-DP can be connected directly to the PLC’s extension port or
to any other extension unit’s right side extension port.
The 32NT-DP occupies 8 points of I/O on the PLC’s expansion bus. The 8 points can be
allocated from either inputs or outputs. The maximum I/O for the FX
0N
/FX
1N
system is 128 I/O.
The maximum I/O for the FX
2N
/FX
2NC
system is 256 I/O.
*1 When connecting to an FX
2NC
series PLC, an FX
2NC
-CNV-IF is required.
Table 1.2: Applicable PLC
PLC Type Version Controlled maximum I/O points
FX
0N
Series All version 128 points
FX
1N
Series All version 128 points
FX
2N
Series All version 256 points
FX
2NC
Series
*1
All version 256 points