53
CONNECTIONS
PRINTING
ADJUSTMENTS
PRECAUTIONS
FEA
TURES
PREP
ARA
TION
OTHERS
TROUBLE-
SHOOTING
Symptom
Check and Remedy
The stored image in the memory cannot be
Is the S size ink sheet installed when selecting “S” in “MODE : AUTO/S”? Or
enlarged to fill the maxim print area.
is the L size ink sheet installed when selecting “AUTO” in “MODE : AUTO/S”?
→
Check the current setting. Refer to pages 20-21.
Is the paper size set to “N” in the size setting in SIZE/TIMING menu?
→
Set the size to “M” or “W”. Refer to pages 32, 43.
Is the print area set correctly in SIZE/TIMING menu?
→
Check the setting of the print area. Refer to pages 43-44.
The colour of picture quality is different
Is the colour of the image stored in the memory adjusted?
between the memorized image and the
→
Adjust the colour of the image stored in the memory with the image
printed image.
adjustment display (COLOR ADJ). Refer to pages 38.
When the video signal ( e.g. without colour burst Is the DCF set to OFF?
signal) is inputted to the unit, the image on
→
Set the DCF to OFF. Refer to page 47.
the monitor screen or printed image becomes
monochrome or rainbow-like coloured image.
The colour or picture quality is different between Is the image on the monitor screen adjusted?
the image on the monitor screen and the
→
Adjust the image on the monitor screen with “R-SUB” and “B-
printed image. (When the colour and picture
SUB” in the SIGNAL SET1 menu.
quality are same between the image stored in
Refer to page 48.
the memory and the printed image.)
The set comments do not appear on the
Is the COM set to OFF?
print paper.
→
Set the COM to ON. Refer to page 41.
Is the comment inputted?
→
Input the comment on the menu. Refer to page 42-43.
Wired remote control cannot be operated.
Is the plug of the remote control disconnected from its terminal on the unit?
→
Connect the plug of the remote control to the REMOTE terminal on the
unit.
Is the wired remote control for this unit (accessory) used?
→
Use the remote control for this unit.
Is this unit operated through RS-232C interface?
→
Use the remote control when inputting RGB, VIDEO, or S-VIDEO signal.
