49
CONNECTIONS
PRINTING
PRECAUTIONS
FEA
TURES
PREP
ARA
TION
OTHERS
TROUBLE-
SHOOTING
ADJUSTMENTS
Gray part is
cut when
MARGIN CUT
is ON.
SYSTEM SET
PAGE INC : OFF/ON
LIVE SEL
: ANA/DIG
CONV
: OFF/ON
REMAINING : OFF/0
CHANGE : OK/CANCEL
REMOTE SET
BAUD RATE : 1200/2400/
4800/9600
COMMAND TYPE : A/B/C
RESPONSE : RET/NO
BUSY LEVEL : H/L
BUSY MODE : PRN/MEM/TIM
V SYNC MEM : OFF/ON
CHANGE : OK/CANCEL
AUTO CUT
Sets to cut the printed paper automatically or not.
ON
AUTO CUT is available.
OFF
Cuts the printed paper automatically when starting next
print. Pressing MONITOR button and MEMORY button at
the same time is also available to cut the printed paper.
OP MODE
Sets print type automatically.
4P
Surface coated print is available.
3P
YMC print is available.
To set this mode allows only YMC prints, even when setting
print paper with surface coat.
SYSTEM SET System setting display
PAGE INC (Page increment)
Every time pressing MEMORY button, memory page goes
to the next page and image will be memorized on it.
LIVE SEL(Live select)
Switches the monitor display routes of input signal. Selects
to display input signal, or the reflection of image and
adjustment on the monitor.
ANA(Analog)
Displays on the monitor.
DIG(Digital)
Display the reflection of image and adjustment
CONV (Convert)
This function is to output the signals which selected at
INPUT in MAIN MENU to Video output terminal/RGB output
terminal/S-video output terminal.
ON
Outputs to Video output terminal/RGB output terminal/S-video
output terminal.
OFF
Outputs to the same output terminal as the input terminal
REMAINING
Informs the number of remaining paper by a buzzer tone.
OFF
Does not sound the buzzer.
0 ~ 10
The buzzer sounds when 0 ~ 10 sheets of paper are left
(available to set 1 sheet each).
•
If a paper jam occurs, the remaining paper may not be informed correctly. Please
observe the following precautions when you use this function.
•
Do not change the ink sheet size in the middle of using ink sheet.
•
Make sure to replace the print paper and ink sheet at the same time.
(Press MEMORY button for at least 1 second with pressing MONITOR
button for initializing after changing them. It resets the remaining
counter.)
•
Make sure to use the new one when you set the ink sheet and print
paper.
REMOTE SET Remote signal setting display
BAUD RATE
Sets the baud rate of RS-232C.
Set the baud rate according to the connecting device.
COMMAND TYPE
Sets the command type of RS-232C.
Select the command type of RS-232C to control this unit.
•
Select A for normal setting. Depending on the connected equipment, select B or C.
