18
BEFORE OPERATION
USAGE AND KEEPING OF PAPER SHEET SET
2
BEFORE PRINTING
•
Fingerprints or dust on the paper’s surface may degrade print quality and cause paper
jams. Immediately after the paper is replaced, 2-3 images may be printed with a blank
part due to hand’s dust or oil. Refer to Pages 15 - 16.
•
When print paper is rapidly transferred from a cool place to a hot place, vapour or dew
will be generated on the paper’s surface causing paper jams or degraded print quality.
Leave the print paper in the room to stabilize its temperature before using it.
•
When print paper and ink sheet run out during printing, the printing operation stops and
the error messages such as “PAPER EMPTY” and “SHEET/PAPER” lamp on the monitor
and LCD display are lit. Set new ink sheet or print paper. Refer to Page 51.
•
If paper feeding is repeated while installing the print paper, the indicated number of
prints may not be done.
2
2
2
2
2
AFTER PRINTING
•
When the printed paper is touched by a wet hand, the print may be discoloured.
•
Fading may occur if the print-face is exposed to organic chemical agents which may
affect print paper (e.g. alcohol, ester, ketone based).
•
Fading will be accelerated upon contact with PVC-based materials (e.g. adhesive
tapes, rubber erasers, etc.).
2
2
2
2
2
STORAGE
•
Avoid storing prints in direct sunlight or places with high humidity.
•
Leaving the print paper in contact with PVC-based materials causes colour of print
paper to come off and to be stained.
•
Never store print paper in places that are close to heater, hot (5
°
C-40
°
C) , or humid
(20-80%RH).
NOTE
If the print paper is installed for two or more days, the prints may be rolled after
printing. There is no cause for alarm because the print paper is rolled on the inside
of the printing unit.
