Mitsubishi MOTORS Outlander PHEV 2016, Owner'S Manual, Page: 400 / 490

nuts make light contact with the wheel
and the wheel is not loose.
Type 1
Type 2
CAUTION
l
Never apply oil to either the wheel bolts or
the nuts, or they will tighten too much.
NOTE
l On vehicles with aluminium wheels, if all 4
aluminium wheels are changed to steel
wheels. e. g. when fitting winter tyres, use
tapered nuts.
8. Lower the vehicle slowly by rotating the
wheel nut wrench anticlockwise until the
tyre touches the ground.
9. Tighten the nuts in the order shown in
the illustration until each nut has been
tightened to the torque listed here.
Tightening torque 88 to 108 N•m
CAUTION
l Never use your foot or a pipe extension for
extra force in the wheel nut wrench. If you
do so, you will tighten the nut too much.
10. On vehicles with wheel covers, install
the covers (refer to “Wheel covers” on
page 9-17).
11. Lower and remove the jack, then store
the jack, flat tyre, and chocks. Have your
damaged tyre repaired as soon as possi-
ble.
12. Check your tyre inflation pressure at the
next gasstation. The correct tyre pres-
sures are shown on the driver’s door la-
bel. See the illustration.
13. After filling your tyres to the correct
pressure, reset the tyre pressure monitor-
ing system (TPMS).
How to change a tyre
9-16
OGGE16E1
For emergencies
9