Mitsubishi MOTORS Outlander PHEV 2016, Owner'S Manual, Page: 416 / 490

Service precautions
E01000102393
Adequate care of your vehicle at regular in-
tervals serves to preserve the value and ap-
pearance as long as possible.
Maintenance items as described in this own-
er’s manual can be performed by the owner.
We recommend you to have the periodic in-
spection and maintenance performed by a
MITSUBISHI MOTORS Authorized Service
Point or another specialist.
In the event a malfunction or a problem is
discovered, we recommend you to have it
checked and repaired. This section contains
information on inspection maintenance pro-
cedures that you can do yourself. Follow the
instructions and cautions for each of the vari-
ous procedures.
A- Cooling fans
B- Caution label
C- Radiator cap
D- EV cooling reserve tank cap
*: Front of the vehicle
WARNING
l Before performing inspection or mainte-
nance, be sure to disconnect the normal
charge connector from the vehicle and
confirm that the operation mode of the
power switch is set to “OFF”.
l Never touch the high-voltage parts in the
engine compartment. Never remove or
disassemble the high-voltage components,
cables (orange) or connectors. Also, never
disassemble normal charging cables, nor-
mal charge connector, plugs or outlet.
Failure to observe this instruction could
cause an electric shock which can result in
a serious injury or death. These parts
have labels that indicate handling precau-
tions. Follow the instruction on these la-
bels. Contact a MITSUBISHI MOTORS
Authorized Service Point for any necessa-
ry maintenance.
Refer to “High-Voltage components” on
page 2-07.
l When checking or servicing the inside of
the engine compartment, make sure the
plug-in hybrid EV system is switched off
and has had a chance to cool down.
Service precautions
11-02
OGGE16E1
Maintenance
11