Mitsubishi MOTORS Outlander PHEV 2016, Owner'S Manual, Page: 311 / 490

MODE switch
E00703300031
Each time the MODE switch is pressed, the
mode changes to the next one in the follow-
ing sequence: “
” → “ ” → “ ” →
“ ” → “ ”. The selected mode is shown
in the display (A). (Refer to “Mode selec-
tion” on page 8-03.)
Demister switch
E00703901106
When this switch is pressed, the mode
changes to the “
” mode. The indication
lamp (A) will come on. The selected mode is
shown in the display (B). (Refer to “Mode se-
lection” on page 8-03.)
NOTE
l When the demister switch is pressed, the air
conditioning system automatically operates
and outside air (as opposed to recirculated
air) is selected. This automatic switching
control is carried out to prevent misting of
the windows even if “Disable automatic air
conditioning control” or “Disable automatic
air selection control” is set. (Refer to “Cus-
tomizing the air conditioning switch” on
page 8-10, “Customizing the air selection”
on page 8-09.)
NOTE
l When the demister switch is pressed, the en-
gine may start running (except vehicles with
electric heater).
Operating the system in auto-
matic mode
E00704102261
In normal conditions, use the system in the
AUTO mode and follow these procedures:
1. Push the AUTO switch.
2. Set the temperature control switch to the
desired temperature.
The mode selection, blower speed ad-
justment, recirculated/outside air selec-
tion, temperature adjustment, and air
conditioner ON/OFF status are all con-
trolled automatically.
Automatic climate control air conditioner
8-11
OGGE16E1
For pleasant driving
8